Fender washers hold as good as a metal strap and are easier to work with. Metal straps with pre-made holes dictate where the holes need to be drilled which can cause a problem because many impellers have a cross brace on the underside which means you can't put a bolt there, you'll have to bolt it in the plate's next hole over which might not all line up right. With these washers you can put bolts wherever you need.
4 pads: 3/8" thick 2" x 5" (allow for slight variation since these are hand cut). It's recommended to use a pad on each impeller fin - If you install only 1 pad for the snow blower, it may unbalance the impeller and cause bearing wear.
Thirteen: grade8 1/4" x 1.25" hex bolts. Thirteen: grade8 1/4" nylon lock nuts. Twelve: grade5 fender washers. (per pad is 3 nuts, bolts and washers. plus a spare nut and bolt in case you cross thread one). 2 bolts per pad should hold up as good as 3 per pad, it's up to you.
Snow Blower Impeller Kit Compatible with Modifies 2-Stage Machine 3/8" 3-Blade Universal Stainless Rubber Paddle Metal Straps